产品详情
所在位置: 首页> 产品目录> 其他测温>
  • 产品名称:FTB-111涡轮流量计 美国omega

  • 产品型号:FTB-111
  • 产品厂商:其它品牌
  • 产品文档:
你添加了1件商品 查看购物车
简单介绍:
FTB-111涡轮流量计 美国omega由美国omega原厂渠道的深圳鑫博恒业科技有限公司特价提供,FTB-111涡轮流量计 美国omega精度高,寿命长,FTB-111涡轮流量计 美国omega是值得信赖的流量仪表。
详情介绍:

FTB-111涡轮流量计 美国omega

涡轮机流量计,采用经济型滚珠轴承设计
FTB-100 Series
涡轮机流量计,采用经济型滚珠轴承设计

NIST证书
1 / 2%的读数精度±
非金属轴承的寿命长
更换轴承领域可不丢失校准
拆卸快速方便维修
导流锥稳定低质量转子轴承寿命增加
4到20毫安,0-5 V,和缩放的频率输出

The FTB-100 Series of turbine meters have a sealed ball bearing design for high accuracy performance (±?% of reading, not full scale) at an economical cost. The non-metallic bearing retainers minimize friction, thereby allowing these meters to be used with clean fluids that have poor lubricating properties ( i.e.water). Ball bearings also give the widest linear flow range, particularly in larger turbines. Bearing replacement and clean-up are fast and easy, since all internal parts are easily accessible by removing a single nut.
These turbine flowmeters have a low mass rotor design which allows rapid dynamic response, so they can be used in pulsating flow applications. Deflector cones eliminate downstream thrust on the rotor and allow hydrodynamic positioning of the rotor between the cones. This provides wider rangeability and longer bearing life than conventional turbine flowmeters. Integral flow-straightening tubes minimize the effects of upstream turbulence.
FTB-100 Turbine Meters are available with integral signal conditioners (as shown in photo) which provide scaled and unscaled frequencies, 4-20 mA, or 0-5 Volt outputs. Units without integral signal conditioners are supplied with mating connector for two-wire hook-up.
SPECIFICATIONS
Accuracy: ±?% of reading
Repeatability: ±0.1% of reading
Maximum Temperature Range: -268 to 232°C (-450 to 450°F)
Maximum Intermittent Overrange: 150% of maximum range
Minimum Output Amplitude: 30 mV Peak-to-Peak Unscaled Pulse
Materials of Construction:
Body: 304 stainless steel; 1/2 NPT bodies contain Silver Solder. 3/4 NPT and larger are welded.
Rotor: 17-4 pH steel
Bearings: Ceramic
Minimum straight pipe requirements: 10 pipe diameters upstream, 5 downstream

Model No. Fittings Linear Flow Range
Water
Max Operating Pressure Max Pressure Drop Length
mm (in)
Nominal
K-Factor
Pulses/Gal
Weight
kg (lb)
LPM GPM
FTB-101 ? MNPT 1.32 to 13.2 0.35 to 3.5 5000 psig 3.0 psid 62 (2.45) 13,000 0.4 (1)
FTB-102 ? MNPT 2.84 to 28.4 0.75 to 7.5 5000 psig 5.0 psid 62 (2.45) 10,000 0.4 (1)
FTB-103 ? MNPT 4.73 to 36 1.25 to 9.5 5000 psig 5.2 psid 62 (2.45) 6,000 0.4 (1)
FTB-104 ? MNPT 6.62 to 61 1.75 to 16 5000 psig 3.0 psid 70 (2.75) 4,100 0.4 (1)
FTB-105 ? MNPT 9.5 to 110 2.5 to 29 4250 psig 5.0 psid 83 (3.25) 2,200 0.4 (1)
FTB-106 1 MNPT 15 to 227 4 to 60 3850 psig 5.1 psid 89 (3.5) 640 0.9 (2)
FTB-107 1? MNPT 23 to 352 6 to 93 3850 psig 4.3 psid 99 (3.88) 410 0.9 (2)
FTB-108 1? MNPT 30 to 492 8 to 130 3000 psig 3.0 psid 111 (4.38) 230 1.4 (3)
FTB-109 2 MNPT 57 to 852 15 to 225 2500 psig 3.3 psid 121 (4.75) 120 1.8 (4)
FTB-110 2? MNPT 95 to 1514 25 to 400 2250 psig 4.0 psid 154 (6.06) 62 2.3 (5)
FTB-111 3 MNPT 151 to 2460 40 to 650 2000 psig 4.0 psid 191 (7.50) 55 3.2 (7)


产品型号/产品描述
FTB-101 0.35-3.5 GPM Range, Water; 1/2 MNPT
FTB-102 0.75-7.5 GPM Range, Water; 1/2 MNPT
FTB-103 1.25-9.5 GPM Range, Water; 1/2 MNPT
FTB-104 1.75-16 GPM Range, Water; 3/4 MNPT
FTB-105 2.5-29 GPM Range, Water; 3/4 MNPT
FTB-106 4-60 GPM Range, Water; 1 MNPT
FTB-107 6-93 GPM Range, Water; 1? MNPT
FTB-108 8-130 GPM Range, Water; 1? MNPT
FTB-109 15-225 GPM Range, Water; 2 MNPT
FTB-110 25-400 GPM Range, Water; 2? MNPT
FTB-111 40-650 GPM Range, Water; 3 MNPT
注释: Comes with NIST certificate for water and complete operator’s manual.
Standard NIST calibration: Viscosity = 1CK: no charge; 0.8 CK to 0.99 CK: add $369; 2 CK to 100 CK: for FTB-101 through FTB-107, add $369; for FTB-108 and FTB-109, add $356, and for FTB-110 and FTB-111, add $465.
If an integral signal conditioner is required please order as a system. Omega will scale the signal conditioner to the turbine meter.
 

FTB-111涡轮流量计 美国omega

 

标题:
内容:
联系人:
联系电话:
Email:
公司名称:
联系地址:
 
 
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

电话:0755-82768776 0755-83987276 0755-82736276 

粤公网安备 44030402001379号