FLSC-C1-LIQ信号调节器 美国omega
一体式或远程信号调节器
FLSC-C1-LIQ Series
1年保修 新产品! CE
一体式或远程信号调节器
FLSC-C1-LIQ Series:一体式或远程信号调节器
FLSC-C1-LIQ
Loop Powered 4 to 20 mA
Signal Linearization
Factory Configuration Available
Windows? Configuration Software*
The FLSC-C1-LIQ is a microprocessor controlled 2-wire 4 to 20 mA transmitter. The FLSC-C1-LIQ converts a low level, frequency signal from a flow sensor into an analog 4 to 20 mA output. The output is proportional to the flow rate.
Specifications
Input Signal Type: Magnetic pickup
Input Frequency Range: 0.2 Hz to 4 KHz
Signal Level: 10 mV rms to 30 Vdc
Power Supply: Loop power 10 to 30 Vdc Reverse polarity protected
Loop Burden Voltage: 8.5V
Analog Output: 4 to 20 mA 24 mA overflow condition
Load Resistance: Maximum 650 Ω at 24 Vdc
Accuracy: ±0.02% of full scale
Temperature Drift: 40 ppm/degree C
Communications: RS232 port for configuration and diagnostics
Operating Temperature: -40 to 85°C (-40 to 185°F)
Humidity: 0 to 90% non-condensing
Enclosure: Extruded Aluminum Explosion-Proof ATEX enclosure
Regulatory: CE Compliant Up to 20 point linearization. Windows? Configuration Software* available for free download at omega.com/ftp(cable sold separately)
FLSC-C1-LIQ are designed for integral mounting on the FTB-100, FTB-200, and FTB-400 Series** liquid turbines.
** Visit omega.com/ftb100, omega.com/ftb200, and omega.com/ftb400 for details.
产品型号 产品描述
FLSC-C1-LIQ Loop-powered signal conditioner, 4 to 20 mA, CE/ATEX
OM-CONV-USB USB to RS232 converter
FLSC-C-CABLE Molex to 9-pin "D" connector
FLSC-C1-LIQ信号调节器 美国omega
