FP7012-GI流速传感器 美国omega
插入型叶轮流速传感器
FP7001A
插入型叶轮流速传感器
流量和温度的同时测量
非常经济
广泛的化学相容性
高电平脉冲输出流量放大器无需
°10mV／C模拟输出温度
The OMEGA? FP7001A paddlewheel flow and temperature sensor is ideal for accurate monitoring of typical industrial water flows, hard-to-handle corrosive aqueous solutions, and high purity fluids . The FP7001A utilizes a paddlewheel-like rotor whose motion is converted into a high-level square wave pulse output by an open collector Hall effect sensor. Pulse amplitudes from 5 to 18 V are possible, depending on input power. The FPW-15 120 Vac converter plugs directly into a wall socket and outputs a regulated 15 Vdc at 400 mA.
The DPF700 Series panel meter supplies power for the flow sensor and provides rate indication, or totalization and batch control (when ordered with the dual relay option). When ordered with the analog output option, the DPF700 can be used to interface the FP7001A flow signal to such items as strip chart recorders, dataloggers, and computer interfaces.
The system consists of the flow sensor, an installing fitting, and the electronics. The PVC tee fittings are supplied with a PVC locking nut, and the galvanized iron tee fittings are supplied with a brass locking nut to provide secure metal-to-metal mounting to the threaded brass insert.
The FP7001A is not compatible with FP-5300 or FMG-5300 Series installation fittings. When powered by the FPW-5 five Vdc wall socket converter, the FP7001A has a TTL level pulse output which can be used with a variety of pulse input flow indicators, signal conditioners and controllers. It is not compatible with the FPM 5500/5740.
SPECIFICATIONS
Accuracy: ±2% of full scale
Repeatability: ±1% of full scale
Power: 5 to 18 Vdc @ 10 mA maximum
Wetted Materials: FP7001A sensor: polypropylene body, PVDF paddle, FKM O-ring, 316SS shaft. Galvanized iron tee includes brass insert and locking nut. PVC tee has PVC insert and locking nut.
Fluid Temperature/Pressure Range: Do not exceed the maximum ratings of your piping. Depending on the material of the fitting, the operating temperature/pressure may be limited by your piping and not by the sensor. For all PVC tee fittings, do not exceed 150 psig @ 27°C (80°F), 100 psig @ 38°C (100°F), 60 psig @ 49°C (120°F) 30 psig @ 60°C (140°F), due to the insert in the tee. FP7001A sensor: 0 to 26°C (32 to 80°F) up to 150 psig; max. pressure decreases 1.1 psig per each 0.56°C (1°F) above 27°C (80°F) for a max temperature of 93°C (200°F) at 18 psig max
Frequency Output: Nominal 1 Hz/fps; amplitude of open collector pulse = Vdc input power
Cable Length: 2.4 m (8')
Weight: 0.2 kg (1/2 lb); FP7030 fitting: 4.3 kg (9.5 lb); FP7030-GI fitting: 2.8 kg (6.25 lb)
Max Viscosity: 5 cps
Temperature Sensor Specifications
Range: 2 to 150°C (36 to 302°F)
Accuracy: ±1°C
Output: 10 mV/°C
Power: 5 to 18 Vdc
产品型号/产品描述
FP7001A Paddlewheel Sensor with Polypropylene body/316SS shaft and Temperature Sensor
Fittings (required)
FP7007 3/4 " PVC Tee
FP7007-GI 3/4 " Galvanized Iron Tee
FP7010 1" PVC Tee
FP7010-GI 1" Galvanized Iron Tee
FP7012 11/4 " PVC Tee
FP7012-GI 11/4 " Galvanized Iron Tee
FP7015 11/2 " PVC Tee
FP7015-GI 11/2 " Galvanized Iron Tee
FP7020 2" PVC Tee
FP7020-GI 2" Galvanized Iron Tee
FP7025 21/2" PVC Tee
FP7025-GI 21/2 " Galvanized Iron Tee
FP7030 3" PVC Tee
FP7030-GI 3" Galvanized Iron Tee
Accessories
FLSC-100 transmitter module for FP7001A
FPW-15 15 Vdc power supply
注释: Comes with operator's manual.
FP7012-GI流速传感器 美国omega
